|
Missouri | What is the GPS source in the sprayer?
If it is also the Geosteer you will need another 4002506-12, because that cable has an ethernet port. If your GPS will come from a Geosteer, you have to have a cable with an ethernet port to connect to it.
If your GPS source in the sprayer is a regular Ag Leader GPS receiver, or any other receiver sending serial NMEA on the serial port, you can use ANY display cable (all cables have serial GPS ports).
If the same display is moving between the system with the Geosteer, and the sprayer, then your missing GPS signal is due to GPS settings on the display that need to be changed each time the display is moved from one machine to another.
[Home screen] --> [Big Wrench Button] --> [GPS & Steering Button]
On this screen, if it still shows "Geosteer" when it's not connected to a Geosteer, that is why you do not have GPS. The steering setting needs to be taken off Geosteer (set to "manual guidance" if you have no steering system on this vehicle), and then the GPS source needs to be set to either autodetect, or Serial, as appropriate. | |
|
Changing Ag Leader display power cable
