|
Butterfield, MN | You can change the rate on the go. If you tap on the Product Control box, you should be able to see the Rate +/- number in the lower half of the screen along the left. Whatever this number is, you will be able to adjust your rate by each time you tap in the rate area in the lower left corner of the job screen where the rates are displayed. When you have your product selected as Auto, you will have an up and down button that displays. Tapping either one of these will adjust your rate by the number loaded in the Rate +/-. The other option is to tap in the Product Control box and tap in the area with Rate Cal and you can change it to any rate value you want.
Guidance was an unlock on the Viper II, and it was not especially great, from what I remember seeing. Using a regular lightbar seemed to be a lot more popular.
You should be able to create a boundary while not physically spraying with the outside boom, but I'm pretty sure that it's still going to put the boundary at the distance from the center of the machine where your outside boom tip would be. | |
|
A couple questions on Viper II in a gator
