|
Central Iowa | Shaft RPM Sensors as well as SDS sensors are the last Item in the item list that are to be detected in the Sensor Detection page.
Edit:
Found a list on the sensor detection page on the integra explaining the install instructions for muxbus sensors
1. Rear row seed sensors from left to right
2. Front row seed sensors from left to right
3. Section Transmission sensors from left to right
4. Ground speed pickup sensor
5. Auxiliary Sensors in the following order:
a. SDS Sensors
b. EdgeVac Sensors
c. Pnuematic Down Pressure
d. Air Compressor Pressure
e. Bulk Seed Tank Pressure
f. Bulk Seed Tank Weight
Edited by deadmau5 5/23/2016 08:54
| |
|