|
North Central Alabama | I just bought a old center post Coats 40-40s tire machine.In the maintance section it says to extend the 7" diameter bead loosening cylinder to the top of it's stroke.Take out breather plug and check oil.
I believe the little amount oil it stays on top of the piston to lube oil rings and piston since the cylinder is air operated.The Coats manual is old and it says to use either there part#101411 oil or substitude with Shell tellus21 or Empak 4061.What kind of oil could I find easily to use to be safe? I probally would not need but a quart.
Edited by 69zfarmer 5/1/2016 10:44
| |
|