|
| Once your tractor is started and everything has gone through its power up sequence, you can recycle the planter/monitor without cycling the key to get rid of those nuisance alarms due to low voltage during startup.
From your home screen on the Pro 6/700, go to the "Diagnostics" box, then scroll along the bottom to find "Planter" and highlight that. There will be a box called "Reset" at the top, highlight that. You will get a message asking you to confirm the reset. Hit "Yes" and the planter/monitor will go through a power down/power up sequence without keying off/on the machine. Your voltage alarms should go away if everything is working properly. Hope this helps. | |
|