|
NW Ohio | did a quick search and what I told you appears to be correct. CMR in on the other port and manual location is the easiest otherwise, you have to feed the NMEA out from the NAV diagnostic (TX pin) cable (TX pin) to the Bluetooth (RX pin)
If the other port is in use by something, there is a port extension end on it that may be utilized. The NAV uses the RX/TX so that is not available on the NAV cable extension. Most other cables use the CAN pins and have the RX/TX available in the port extension. | |
|
750 Ntrip and autopilot
