Ludington/Manistee MI area | WCGrad - 2/5/2016 20:35
Cut a hole in the door or bin and push an auger into the center. Had to do it with a new bin a few years ago. This way you can pull enough grain out that you can safely enter the bin to poke at the plug.
Did something very similar only we slid a 6 inch pvc pipe in then a 4 inch auger inside that. Used the loader to drive the pvc in. We were able to disassemble part of the inside of the door so no permanent changes were needed.
Edited by Tomcat 2/5/2016 22:27
|