AgTalk Home
AgTalk Home
Search Forums | Classifieds (9) | Skins | Language
You are logged in as a guest. ( logon | register )

8310R with GS3 2630 display to control IH 1240 planter with section control
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
torn
Posted 11/25/2015 23:51 (#4919238 - in reply to #4918562)
Subject: RE: 8310R with GS3 2630 display to control IH 1240 planter with section control


roaming
mdscuba5 - 11/25/2015 09:29

Wanting to hook an 8310R with a GS3 2630 display to a 2013 IH 1240 planter to control population, down-force and most importantly SECTION CONTROL. We have always went with the answer of NO but just wanted to see if anything has changed in the past few years with this setup. We recently learned that the pro 700 can control our seedstar xp system with section control and that never used to be the case either. Anyone with any information at all - we would greatly appreciate your insight.

Thanks

Answer is still no. The Pro 700 can control your green planter via ISOBUS. However, the Case IH planters are not ISOBUS, so they require a Pro 700 for operation. The only way your 2630 could run a red planter is if you replaced all the red factory electronics with ISOBUS-compliant electronics.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)