|
Central Illinois | Not sure how JD is wired but all the Spra Coupes I owned had a "factory" Raven harness that can handle 7 sections. The extra wires were just bundled up next to the valves. I broke our 60" boom out as follows
#1 left outer 120"
#2 left inner 180"
#3 center 120"
#4 right inner 120"
#5 right outer 180" (shut this one off to make first pass around perimeter to set you up to run planter tracks)
#6 right side fence row nozzle ( http://www.teejet.com/english/home/products/spray-products/banding-... ) this is what i use to apply full rate on the edge
Clear as mud eh? Steve | |
|