roaming | trackerboats - 1/29/2015 07:30
here is the best option for this application "imo", to run 20/20 seed sense and field view you will need to remove the factory seed sensors and replace them with precision planting harness and sensors, you will also add 2 precision vaccum sensors and a few weigh pins on the row units to see what your down pressure is doing, you will then have an ipad, 20/20 monitor and pro 700 in your cab, you can mount the 20/20 out of the way somewhere because you really wont need that for much "just bassicly a brain for the fieldview" so your pro 700 and ipad will be where your looking all the time.
accustat is junk in my opinion because it dosent actually map your singulation/down pressure ect..
This is not correct. AccuStat maps singulation, skips, multiples, and spacing CV. It does not map down pressure.
trackerboats - 1/29/2015 07:30
I would not use 20/20 rowflow to control the cnh planter just watching it with the 20/20 and fieldview will give you an enourmous roi because you will be able to make adjustments to your planter.
True, IF you're willing to take the time to understand what the display is telling you AND to make the appropriate adjustments. Otherwise it's an expensive toy. (Ditto for AccuStat.) |
Case Monitor Options
