Tip of the Thumb of Michigan | Been using this ezsteer for 5 years. Near the end of fall tillage it would kick out almost immediately. I changed the override back and forth and when I got it all the way down to 1 it held for maybe 5 seconds. It was working one day and then the next morning the problem started. I swapped it with another motor and it did the same thing. I guess I will look at swapping the T2, but was looking for some insight to go with it. I looked at the harness connection to the battery, but did not remove them. They "looked" fine. I've also had trouble with the footswitch engage not working with this T2 as well. |