|
| Were in the middle of playing arround with seed drive for a 3800 24 row so only 7 less than your 31. We are going with a pair of 1101 (7.9 cdi) eaton motors in series a brand 0 to 15 gpm pw valve and a dj encoder. We are going to run the motor off of a accessory drive pump on a 9130. We are going to use the marker circuits so we don't have to re plumb the hydraulics. The 1101 eatons are because they are larger displacment which I think is your concern with the 4180. Will the 4180 run it I don't know but they are 1350 per unit and you are going to need 2 plus 2 control modules. The beauty of the 1101 motor is there are variants up to 15 or 16 cubic inch displacment so if it is not enough we can quickly change them to larger ones. I will post pics when we get it done. | |
|