AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

2510H nh3 after ground is chiseled
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
simscott
Posted 11/24/2014 14:16 (#4198665)
Subject: 2510H nh3 after ground is chiseled



Dalhart Texas
This was real heavy corn stalks that were disked then had a Landoll Coulter Chisel ran across it. Would it work now to run the 2510H and apply nh3 or would it work better after .50" rain to settle the soil before running the nh3. The soil is moist 3" down but the top 2" is pretty dry.

Also, seeing as how this ground has been chiseled, will a 8235R pull a 17 row 2510H 7-8 mph? I've read previous posts about 8330 being short on power but I'm thinking that was side dressing when corn was up. I'm thinking ride quality on my solid axle 8235R will be the limiting speed factor.



(image.jpg)



Attachments
----------------
Attachments image.jpg (252KB - 184 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)