|
North Dakota | EZ-Steer should be able to stay within 1-2 inches of the commanded line at 5-6 mph. If you cannot stay within that margin you have to change the settings for angle/turn or wheelbase to get to stay within that range. If the tractor is staying within that range then you need to look at your correction source, omni xp should keep you closer than 3-4 inches pass to pass 80% of the time, hp should be 2-3 inches 90% of the time. After that you have to look at implement drift, especially in hills. I have seen planters and drills drift downhill as much a 18 inches, so the tractor is online but the implement sags and next pass is not correct. You should be able to drive over your same tracks when you turn around if everything is set correct in the 750. | |
|