|
KY | Auger always swings out without fail. About twice last year it didn't come in and had to try it a few times. Worked flawlessly during wheat this summer. Today I had it stick just about every time. Thought it could be an intermittent connection in the switch, but you can hear the flow change when the valve swaps every time. Then thought the thing was sticking when fully extended, so I stopped about a foot short of full out on the next dump, no dice. When it finally goes the 10th, 12th or whatever try, it goes all the way at full speed without issue. Most likely suspect here? | |
|
IH unload auger swing, sometimes won't come in...
