roaming | softtail - 8/31/2014 10:58
Torn Isnt the 700 just going to auto config the port as soon as he changes it? or will he have to set up port b and run it off of the that when he moves it? I tried changing port a on a setup like his and it would autoconfige itself back to tsip almost immediately.
Lots of variables here. If he's currently running the receiver on CAN, then there won't be any communication using Port A or Port B, and the new configs should stick at least until the next power cycle. If he's currently using RS232 on Port A, then the easiest thing would be to config Port B for the 2630, and vice versa if he's currently using RS232 on Port B. |