roaming | TripleM - 8/30/2014 17:16
I am only transferring the receiver for gps signal only not for auto steer is there an option in the pro700 monitor that I should click before taking off the receiver so the signal will work on the combine without having the pro700 or nav2 box in the combine?
You need to use the Diagnostics > RDI screen to configure the desired receiver port (A or B) to output the correct data strings for the 20/20. You may want to ask your dealer for help, as the user interface for the receiver menus takes a bit of getting used to. |
Trimble and John Deere
