AgTalk Home
AgTalk Home
Search Forums | Classifieds (7) | Skins | Language
You are logged in as a guest. ( logon | register )

Raven Cruizer Tech
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Herbie56
Posted 8/28/2014 15:57 (#4043344 - in reply to #4041711)
Subject: RE: Raven Cruizer Tech


Coles County, Illinois
Can't help you with a dealer. I went back and reread your post from December and I have some questions. When you say Smartrax to me you're saying that you have a hydraulic valve block and not a motorized steering wheel. I have Smartrax MD which I had to remove the steering wheel and add a gear pinion. The steering wheel is driven by an MDU (motor drive unit).


Raven has had some issues with articulated tractors and has issued several updates. We will need to get the software version you're running for the smartrax. But first I need to know whether you're running Smartrax or Smartrax MD and secondly we need to know whether you're running a can based system or serial based system. They had two different cabling systems for running a Cruizer II and smartrax. On the rear of the Cruizer II you have three 9 pin connectors. Port A. Port B, and Can buss. A and B are on the bottom and can is above port B. Can based will use port B and can. Serial will use port A and port B.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)