|
Ellsworth, Wisconsin | 1. I will check the openers to see if they are 2"
2.all our till ground is sod. We have a 130 acres of corn. 50 was prevented plant from last year that we airflowed clover on and no-tilled. 30 was old alfalfa that we no tilled and 50 was corn on corn we chiseled this spring. We normally fall chisel but we got an early frost and it was too froze.
3. Answered in # 2
4. Fertlizer was a little all over the place. We learned this year that kinze ops manual rate charts are by no means close. We set the planter #200 and took off. Planted the tilled ground first. Ordered 4 ton. Which should plant 40 acres. Ran out at about 30 acres which is 266# at that point we turn it down. To about 210# We put on 300# of urea with the air flow on all ground. 10 acres of our sprayed after planting alfalfa got double spread urea by accident. Even so it doesn't look great porably got burned.
The sod was fairly went when we planted put not real bad seem to be closing well. On the no till we moved the down pressure springs all the way so there was full pressure. Moved our Martin row cleaners down 2 holes from tilled setting. We all so moved the closing wheels down to the 2nd from last pressure setting.
We never planted any no till will our 7000 so this is all new to us. | |
|
Need a really good corn expert in the west WI East MN area. Know anyone?
