|
Central WI | Have some frustrations.
Here is what we have.
NH TG275 with an ezpilot and fm1000 on rtk via cell (planting tractor)
NH T8.360 with autopilot and fm1000 for tillage (just put the fm1000 in)
My plan was to switch the screens and move the dcm300 modem to the T8 and use it for some specialty work we have to do at low speeds. Figured it would work great. I have the hybrid cable 75741 installed from the nav to the fm1000, but I have a 262 on the roof for the T8.
I can not for the life of me get the fm1000 to communicate with the autopilot controller when 75741 is hooked to port c with an ag25 on the roof also. I can get it to work with port B but I get no RTK corrections.
I read in past posts that this was an issue a while back, but both fm1000's are on 8.01 and the nav was just sent to agexpress to get flipped to trimble and updated to the latest firmware.
What am I doing wrong here. Missing a cable? | |
|