|
| As with the FM1000, when upgraded to RTK, there should be no need to nudge all the lines across in the field to compensate for drift. What it does instead is is act as Trim, which will allow you to fine tune the position of your machine on the line. If you want to move over from last years furrows a small amount, then you can do a Shift to Here, or you can actually enter a set distance to the left or right from your existing AB line. You will then have the option to Save or Don't Save. If you Save, it will create a new line. Either way, both these options will move your machine over the same distance, right across your field, regardless of what direction you are going.
| |
|
cfx 750 nudge problem. hope trimble is reading.
