|
SEQ, Australia | Yes, there is a basic profile required to be loaded into the NavII which has all the basic settings for steering the tractor, as well as the settings for the basic orientation of the NavII, steering sensor, GPS Antenna height etc. These are stored on a vehicle-by-vehicle basis on the NavII or the display (on an FMX anyway). I am unsure what you have access to on the CFX for getting to the databases, but on the FMX you can pick through the display database or the NavII database to find the correct vehicle, and then measure up/enter all the height & offset parameters, and calibrate the gains & deadzones. | |
|