|
| The wires on the switch looked just fine but I cleaned them just to be sure.I did notice that there is a breaker on the left side that gets pretty warm before the flashers quit working.Maybe it is a bad connection.?I will also try a new ground wire to the cab to see if that helps.Thanks again.Another thing,why does it seem like I can run the flashers for 15 or 20 minutes in the shop when the tractor is not running but when the tractor is running for awhile the flashers quit?Any coincidence?
Edited by hdheritage1 5/31/2014 12:01
| |
|