|
Ionia Co. Michigan | I have a new 2020 and when I turn key on lights on switches light up for about 5 seconds and then go out. Switches dont do anything when turned on and I get nothing on the screen either. It is on a magnium 180 and plugged into the a pillar 3 pin power plug. As soon as I started tractor i get an error code of 14908 also. Can this be related? Precision dealer is coming out this week for final calibration and setup so we'll see what he says also. If I unplug power and replug the same 5 seconds of lights and then nothing. Do I need the iso plug plugged in even though the 2020 is controlling the planter? The planter is a new 1770nt. | |
|
2020 not turning on in magnum?
