SW part of the "Cyclone" State!! | scottpf - 4/23/2014 19:48
If you go to Diagnostic> gps, there should be a horizontal graph that shows convergence distance. Also go to the RDI screen and on the top line, the first letter should show r. What baud rate is yours set at? Look at toolbox > gps > go down 1 page.
Little r is not converged. Big R is converged. If in Central Region, make sure it is set to Central and 2400 baud. What versions of software and what display are you running? |
RTX convergence not registering on pro 700
