Near Intersection of I-35 & I-90 Southern Mn. | simple man - 4/23/2014 12:04
Well this isn't turning out out like I thought. I use a extrA cable of a integra ans plugged in a rate module. Usdd the optional harness to plug into thd mark IV and mesed it up
It still turns on the belt but no read out. Matbe I can use the remote switch plug on it Iin place of the wiscker switch. Implement switch wont work on spreader anyway. This is a whole lot more involved than I thought for just to get mapping turned off and on. Thanks for all the info.
By no read out, I assume you mean that you don't see a coverage map. You would never see a read out in the sense of the rate of product being applied with the Compass. If you want those features you need a Versa or Integra.
When you say, "I use a extrA cable of a integra ans plugged in a rate module. Usdd the optional harness to plug into thd mark IV and mesed it up".
Do you mean an Application Rate Module or another module. The Application Rate module is what is needed. Instead of an implement switch a 12V relay can be used. This 12V relay can be activated by your Mark IV.
Using a relay is possibly not necessary but this will keep the two systems isolated. |
Compass Coverage Map-Findings
