|
NWMO | I have pulled a 750 with a straight hitch with an 1135 MF. No front end weights, no duals, no problems. Drawbar on the tractor did take on a funny shape when the drill was full so I did support the front of the drill by using a chain attached around the quick hitch on 3-pt. I Set the height to where it was holding weight when the drill was lifted up but not holding weight when actually drilling. If you do this make sure the chain is long enough that when you turn on the end the quick hitch clears the drill (I know to check for that now). | |
|
4440 vs JD 750 no till
