|
Patton, PA | I'm curious as to what you come up with. i have one doing the same thing. My low charge pressure comes on. I put a gauge on it and it's within specs so I replaced the sensor and it still does it. Cleaned my grounds and it didn't help. I think me next step will be running new wires and if that doesn't cure it I'll have to send the board out to get looked at.
I'm told if the sensor is leaking it's probably bad.
Edited by George_CPA 4/5/2013 22:01
| |
|
New Holland skid loader shutting down (LS140)
