|
| Most rawson motors require up to 6 gallons of oil. If you plumb them in series with a vacuum blower, the rawson only gets what is metered to the vac blower. I would plumb the rawson first and then go to the vac. We have about 6 rawson motors and get along great with them. I don't know if it is wise to plumb two vac blowers in series, especially if they are the older style that don't have a case drain line. Also it is very important to run a low pressure return(case drain) line back to the tractor from the rawson.
| |
|
Rawson Hyd. drive value and questions
