Posted 11/30/2012 17:35 (#2725363 - in reply to #2723987) Subject: RE: ATU 200 Problem
Hello you could try the following 2 things:
1. order PF80976 connected to the black 10 pin connector of harness PF90688. ATU could connect directly to PF80976.
2. The 2 pin connector haves a red and a black wire ? If yes connect the red wire to a good 12 volts/ 15 amp connection. And the black wire to a good ground connection.
The ATU kicks off due to a to low voltage. (When the system has to steer the steering motor doesn,t have a good power supply and kicks off).