|
SE Michigan | For spraying you will need a direct command with liquid module and an auxiliary module. These would be mounted in the tractor. Along with that you will need some sort of flow control and flow meter to be plumbed into the sprayer as well as shut off valves if you do not already have them. Along with that you would need what ever cabling is needed to connect them all together. You do not need an implement switch for the sprayer.
For planting what I have mentioned above will for direct command and modules will allow you to make applied maps of your planting, but you will need an implement switch also.
Integra will do auto-swath which is what is needed to do the spraying and planting mapping. When you setup to do spraying enter all the products you will be using then create a tank mix that will include your chemicals as well as the carrier (water, liquid fertilizer, or what ever) Chemicals can be listed as gallons, quarts, pints, pounds, or what ever, but list carrier as gallons and make sure when you setup to spray you are working in gallons.
I can not give prices, but if you watch ebay and the for sale section on this board you might find some of the things used.
| |
|
Ag Leader - What's next for our setup.
