I was chisel plowing today and the ole Versey was doing great as usual (by the way, I fixed the oil filler cap blowing off-it was the filters on the breather tube), stopped to go help the girlfriends grandparents put up Christmas lights, came back, and now it doesn't barely want to raise the chisel plow. Even the up and down on the coulters will barely move. I was able to finish, but had to put it full throttle to get it up all the way to take it down the road. What would cause this to suddenly happen? Hydraulic oil level is good, no metal shavings or anything in it, could a filter be plugged? The steering is fine, just the remotes are acting up. Any help would be great cause I have a little bit to get done yet and it's going to freeze up on us Friday. As always, thank you all very much.