Posted 11/16/2012 20:41 (#2701104 - in reply to #2700966) Subject: Re: Rolling up barbwire... (HELP)
Baldwin City, KS
IF you have a bobcat and auger... find a piece of pipe that fits the auger shaft, which needs to be about 4 ft long or better. Drill one hole so you can pin it to the shaft, drill another that you can stick a bolt through and nut it. Jam the pipe into the ground, wrap the wire ends around the bolt and start running the auger. Neither the wire or pipe will likely be re useable, but you can roll up one hell of an old stretch of fence with little effort this way. Here to tell you, it works great.