AgTalk Home
AgTalk Home
Search Forums | Classifieds (4) | Skins | Language
You are logged in as a guest. ( logon | register )

Adding ext. switch to ez guide 500
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tater1086
Posted 11/8/2012 09:56 (#2685691)
Subject: Adding ext. switch to ez guide 500


Snipesville, GA
I am going to use an external switch to activate my coverage logging on my spreader truck. I know I need a relay to connect pins 4 and 5. I have my own cable coming today from a computer store. How do I determine which pins are 4 and 5? Are the wires color coded or do I need to use a multimeter set to ohms and do the process of elimination. I could also find the wire ends by checking continuity between the plug and where I cut my wire but I don't know which pins on the harness are 4 and 5 when I look at it.

Thanks for any input.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)