Dallas Center IA 515-720-2463 | I stripped the field. Guidance width set at 22'-6". Machine is 11'-3".
Above pic was the pass finishing the stripping in that part of field.
This year I am going to again set guidance width at 22'-6", but do ever other one or strips 45' apart. As do only the odd passes.
Then come back and the even passes.
Next reset the line and fill in.
But this year I will not have to keep my eyes on the lightbar. Auto steer is on and working.
Also the screen is not on the dash. But off on the right window area. So it will not make such a pretty picture.
Once you get use to not turning back for the next pass just 11'-3" from the last, you just don't want to do it.
Below pic is going west just before the pic in the above post.
 (DSC01136.jpg)
Attachments
----------------
 DSC01136.jpg (55KB - 72 downloads)
|
Tractor wider than implement
