|
NE Iowa | These cushion boxes were made from round 8" tubing, but if the downspout and cushion box are different angles they just welded the flange ring on at an angle to make it hook up. We made the bottom half square so when the corn leaves the downspout it doesn't hit anything but the bottom of the cushion box.....We'll find out soon how it works out.
Edit: We carried a 110 volt wirewelder up the bin and lined the bottom pipe up with the box and spot welded it there, then took it down and finished the welding. That way we had the correct angle/fitting for all pipes.
Edited by FarmerFrank 9/21/2012 13:58
(2012-09-20_13-33-36_530 (450x254).jpg)
(2012-09-20_13-34-00_189 (450x254).jpg)
(2012-09-20_15-51-29_698 (450x254).jpg)
(2012-09-20_16-08-06_907 (254x450).jpg)
Attachments ---------------- 2012-09-20_13-33-36_530 (450x254).jpg (38KB - 404 downloads) 2012-09-20_13-34-00_189 (450x254).jpg (98KB - 412 downloads) 2012-09-20_15-51-29_698 (450x254).jpg (90KB - 419 downloads) 2012-09-20_16-08-06_907 (254x450).jpg (87KB - 372 downloads)
| |
|