AgTalk Home
AgTalk Home
Search Forums | Classifieds (10) | Skins | Language
You are logged in as a guest. ( logon | register )

Tell me about White 445 disc chisels
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
He-mann
Posted 8/24/2012 08:11 (#2555895 - in reply to #2555761)
Subject: Re: Tell me about White 445 disc chisels


North Central Iowa
They do a pretty good job depending on the shovels you use. I would recommend some sort of leveler if you use twist shovels but you can run without but it will just be rough in the spring. Over all the disc up front do a good job of cutting but I always like to cut the stalks first to get it a little blacker. One thing we didnt like was if you really stick it deep or try and go too fast it will want to hop up and down then you will have to slow down or shallow it up. We pulled ours with a 7820 turned up to 225hp and it worked fine but you could still stop the tracter on the headlands. Parts are available through AGCO. Glenco had the same machine just diff number. I would buy one again.

Edited by He-mann 8/24/2012 08:13
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)