NE S.Dakota | Today I was finally getting my Wilmar 745 sprayer in the field, has been a long process.
Started last night, doing a rate check with water, everything seemed to work ok
Today after a round in the field, and multiple other problems, I lost the speed feed, and the rate controller will not work without it. So I did switch to manual rate and finished the field.
I checked wiring connections and then pulled the main plug on the Raven, went through the book re calibrated everything, no help , no speed will register.
This unit has a Dickey John radar sensor mounted to the frame.
Any help appreciated.
seems like everything else on the controller is working.
Put a new pump on, tonight, yes it was leaking from the seal, and the body was corroded enough that the drain plugs had been replaced with bolts. Fortunately the local Runnings store had one on hand.
This was also posted in machinery talk
|