Near-north Ontario, French River | Berg, do you have the bottom gears, 1,2,3,4?? If you have them you aren't stuck in high in the top ones. could be as something as simple as a stuck actuator on the tranny, or the synchro might be out of it. If you get REALLLY lucky it will be nothing more then a loose upper part on the shifter knob. Pop the cover of the shifter knob and make sure the set screws are snug, if they loosen up the assembly will seperate just enough to let air bypass the little oring in the high low splitter assembly. If thats the problem CAREFULLY take the shifter apart, set the o-ring in the grove and snug things down, may have to put a drop of epoxy on the set screws to get them to stay tight. |