Viewing a thread - Home made weight bracket, sorta, Pics.

Forums | Classifieds (52) | Skins | Language

You are logged in as a guest. ( logon | register )

Home made weight bracket, sorta, Pics.	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

ford2110

Posted 11/20/2009 08:37 (#931503)
Subject: Home made weight bracket, sorta, Pics.

This was a bale spear picked up at an auction for cheap, torched some of the forks off to use as uprights and left some on so it could free stand. The second picture is of a "set it and forget" power hack saw, start cutting today, and see if it's done tomorrow, we had the machine shop weld the bracket up for us because we didn't have enough welder to do it ourselves, the weights are Allis Chalmers and were picked up for much cheaper than IH or JD. and they weight around a 100# each.

The Tractor is a JD 2040 with a 175 loader on it and custom made bobcat quick tach.

The ball on the 3pt makes it handy to move the trailor around.

Edited by ford2110 11/20/2009 08:41