Near Intersection of I-35 & I-90 Southern Mn. | I really didn't get that far. I encountered problems in getting a "New Rate" passed to each product in a consistent manner when changing the product rate manually on the Insight.
After my previous post, I tried some things again. This time I was not always able to get a new rate passed to an individual product even when using a one product configuration.
Later in my tests, if I had a single product configuration sending rates to Product 1, things would be fine. If I then changed to a different product configuration where a single Product was being sent to Product 3 the change in rate was still sent to Product 1.
I may try some two product multi-product scenarios with a Raven 700 (two product capability) to investigate the interactions with that combination of equipment.
Possibly everything would work out fine in real field conditions that are not being simulated properly with my bench tests.
|
Anyone using a Raven 750 with Insight Multiproduct?
