|
Southern WI | Still have not found problem with elevator speed. I have a customer with a 2388 and an Insight. When monitoring elevator speed on Insight as soon as you turn the separator on and give it full rpm the elevator speed goes to 500-600 rpm and then jumps around. The insight will then stop mapping and screws up all the yields. As soon as you turn the headlights of the combine on, the elevator speed goes to 496-497 and stays there all day, and the Insight works perfect. Shut the headlights off and it jumps up instantly. I checked all the grounds and they look good. Replaced elevator speed sensor and it didn't make a difference and I even replaced the elevator/ground speed Tee cable from Ag Leader next to the firewall of the combine and that didn't help either. All modules and Insight is current on firmware. Don't know where else to go from here. TIA
| |
|
2388 Insight Elevator Speed Problem
