Posted 6/13/2016 06:20 (#5351986 - in reply to #5351821) Subject: RE: IH 800 soybean planter 15"
Ravenna Ohio
Pull drum off. That end should have a stack of shims. Adjust accordingly
The 3 pin hub behind the drum is slotted where the pin holds it onto the shaft. A second pin is right behind it. Add or subtract shims to adjust drum seal contact. Just looked at my old parts machine. Same through 950.
Sorry. Apparently my old 800 had a 900 update before I got It.
IH 800 soybean planter 15"
