|
Floyd County, Iowa | As you read from the other replies, out is usually the easy part.
For installing, I use a length off all thread, some nuts, some flat washers, and pull in the new bushings.
.
If the rear mount is worn, replace it.
Cut off the huck bolts, install the new mount with grade 8 bolts.
.
Good Luck
Edited by Mark@Northern Iowa 3/21/2017 10:38
 (bushinginstaller.jpg)
Attachments
----------------
 bushinginstaller.jpg (37KB - 8 downloads)
| |
|
Truck suspension bushing removal
