|
SW Montana | We have not had a gearbox fail in 13 years, the tripod center point is NOT their standard center point. What's wrong with their tower boxes? I don't like valleys angles wheels, they cut deep ruts, some of the valley guys here even have built wedges to make them run vertical. I see no downfall with a single tower leg, in fact one of ours was was hooked with a tillage tool and out dealer thought if it was a valley and it happened, it would have ruined the main pipe, instead of just tower leg and knee brace. For repairs, reinkes stuff is very universal, valley has many different expensive pipe depending on spans. | |
|
- Zimmatic, Valley, Reinke: Which one? - GM Guy : 3/11/2016 23:57
- RE: Zimmatic, Valley, Reinke: Which one? - donofarm : 3/12/2016 00:20
- RE: Zimmatic, Valley, Reinke: Which one? - Big Ben : 3/12/2016 00:45
- RE: Zimmatic, Valley, Reinke: Which one? - mkurkowski : 3/12/2016 08:03
- RE: Zimmatic, Valley, Reinke: Which one? - Joey_swtexas : 3/12/2016 08:14
- RE: Zimmatic, Valley, Reinke: Which one? - mignic : 3/12/2016 09:46
- RE: Zimmatic, Valley, Reinke: Which one? - dpilot83 : 3/12/2016 13:11
- RE: Zimmatic, Valley, Reinke: Which one? - GM Guy : 3/12/2016 22:38
- RE: Zimmatic, Valley, Reinke: Which one? - cdcalaway : 3/13/2016 17:33
- RE: Zimmatic, Valley, Reinke: Which one? - GM Guy : 3/15/2016 00:54
|