|
Central IL | I put four in a 24' wilson. One facing forward, then one facing backwards, one facing forward then back again or start vise verse. Still room for tools and a big cooler. All of the gear fits up in the gooseneck. I put rubber mats down a couple of years but found out that its not necessary. As for loading, I made ramp out of osb. I attached two 3/8 bolts to one end, drilled two holes in the back bumper of the trailer, and the bolts just set in the holes so the osb deosnt slide out from under you. | |
|
Snowmobile transporting
