|
NE SD | Seems we were wondering the same things as you. With our 9650 Walker machine, we had to put in a reciever offset......I think it's 8 inches or so to the left of center. With the 9650 STS which looks to be perfectly centered if you look where the reciever is at compared to the feederhouse, after calibrating, we needed to set it up so that it recognized the reciever as being offset 5" to the left. They're not exact, but they are leaving about an 8" overlap on both ends going both directions and that is better than any operator I've ever seen can do. | |
|