Posted 1/28/2015 11:04 (#4344595 - in reply to #4344293) Subject: RE: Adding my own remote engage switch - Trimble 750 & FMX
On the EZ-Steer controller you need to make a momentary connection to wires 10 & 11 on the middle connection. That's the big 25 pin.
Make sure you adjust your display settings to look for the momentary input to engage the steering. Also, you need to hold the connection for about a 1/2 second before it engages. Just quickly tapping doesn't work.
Adding my own remote engage switch - Trimble 750 & FMX
