|
NWC Ohio | I'm guessing seals are ok. Depends on your pump what might be broke. Some pumps have plastic impeller with steel center mount insert, some ss impeller. If your lucky it will just need an impeller or a key. I would guess an impeller problem. If the impeller looks ok, spin impeller and see how much resistance there is. With hypro pumps you can see the shaft from the Hydralic motor just before it enters the pump housing without disassembly. See if its turning or not. Pretty sure there is a keyway between hyd motor and pump shaft too to check. | |
|
Sprayer Pump Help!
