|
| You can just turn them around. I believe it will acutally show you what the acceptable amount of wear in the book is. I think it is around a 1/2 inch. Look in the book , I know the book on our 9760 has the drawing and the instructions for turning the sprocket around. I just saw it the other night while flipping through the book.
Right out of the 9760 Manual, I just found it online. I cant get the drawing to show up.
Feeder House Top Shaft Sprockets
After 1000 hours, depending on the crops being harvested, check the upper shaft sprockets for wear.
If these sprockets are worn past 12 mm (1/2 in.) (A), sprockets can be reversed for additional wear.
A-Dimension 12 mm (1/2 in.)
H39620
OUO6075,000293F -19-31MAR03-1/1 | |
|
9610 Feederhouse sprockets
